Suhr Eclipse Pedal
The Suhr Eclipse is a versatile, no compromise, dualchannel overdrive/distortion that delivers a wealth of warm, organic amp-like tones in an easy to use, compact form factor. Eclipse’s incredible versatility stems from its powerful and intuitive two channel circuit design. Each channel is completely independent, and features its own Gain, Level and 3-Band passive EQ, similar to a channel switching amplifier. Both channels can be voiced independently to accommodate all of your playing needs.
Controls:
Gain:
Adjusts the amount of gain added to your tone, taking you from tubelike classic crunch and overdriven tones to high gain/distortion territory. Level: Adjusts the output volume of the pedal. Eclipse provides enough volume to push the front end of any tube amp into natural overdrive.
B (Bass):
The bass knob is a shelving filter that reduces (counter clockwise) or boosts (clockwise) the amount of bass frequencies of the respective channel.
M (Middle):
The mid knob reduces (counter clockwise) or boosts (clockwise) the amount of mid frequencies of the respective channel.
T (Treble):
The treble control is a shelving filter that reduces (counter clockwise) or boosts (clockwise) the amount of treble frequencies of the respective channel.
Voice (global):
The voice control allows you to tailor the overall brightness of the pedal to be pleasing for your specific amplifier. We suggest this knob be dialed in as preferred first, while the 3-band EQ knobs (B, M, T) are flat (set to the middle). Moving the knob counterclockwise reduces the amount of high-frequencies, while rotating clockwise increases the amount of high-frequencies for both channels.
Specifications:
Input Impedance: 1M Ohm
Output Impedance: 100 Ohm
Power Connector: 9Vdc, center negative, 2.1mm x 5.5mm
Operating voltage: 4V to 18V (nominal 9V)
Maximum Voltage: 20Vdc
Reverse Battery Protection: Yes
Current Consumption: 12mA min, 15.5mA max
Estimated Battery Life: 25 - 32 hours continuous use
Dimensions: 4.875”(W) x 3.875”(D) x 1.375”(H)
Weight: 1.13lb
FX Link Connector: ⅛” TRS jack
FX Link Max Voltage: 3.3Vdc
Shield -> Tip: Activate Channel 2 (Red LED)
Shield -> Ring: Activate Channel 1 (Blue LED)
ROHS Compliant: Yes
